Serpentine belt rattle

[dextrickbell]

If that don't work I'm going with the 4060889

Sent from my VS995 using Tapatalk

 

[dextrickbell]

The 4060889 was also to short. Only belt that fit is a 91 inch belt. Do any one know where I can get a 90 inch belt. Im looking stop the tensioner from rattling

Sent from my VS995 using Tapatalk

 

[FusionFan]

Did you get the Motorcraft JK6875A belt? It's the one designed for the 2.5L

https://www.amazon.com/Motorcraft-JK6875A-Accessory-Drive-Belt/dp/B00392J3BI

 

[dextrickbell]

Thing is the 2.5l out the 2010 fusion does need a power steering pump but since I have an 08 I need the pump so I can't get a belt made for a 2.5l or can i

Sent from my VS995 using Tapatalk

 

[FusionFan]

Ah I see.

Thing is the 2.5l out the 2010 fusion does need a power steering pump but since I have an 08 I need the pump so I can't get a belt made for a 2.5l or can i

Sent from my VS995 using Tapatalk

 

[dextrickbell]

Fixed my rattle I had with my belt tensioner. Just need to get a 90 inch belt. It was a tough one to get on but got it on a rattle gone. The 91 inch belt was too big. Should've went with the 90.5.

Sent from my VS995 using Tapatalk